ATEN CS1708i Specifications

5 pages

To Next Page

ATEN INTERNATIONAL Co., Ltd.

CS1708i

8-Port PS/2-USB KVM over IP Switch With 1 Local/Remote User Access

The CS1708i KVM switches is an IP-based KVM control unit that allows both local and remote

operators to monitor and access multiple computers. Remote users access the switches over

the Internet by means of a web browser using TCP/IP for its remote communications protocol.

The CS1708i supports up to 32 concurrent user logins for single-bus computer access. A

built-in feature that resembles an Internet chat program - the Message Board - lets them

communicate with each other. The ability to exchange information in real time allows them to

cooperatively manage the installation in a smooth and efficient manner.

Among the CS1708i other outstanding features, a Panel Array Mode provides the ability to

simultaneously monitor up to 8 servers per switch; while the Mouse DynaSync™ feature

automatically synchronizes the local and remote mouse pointer movements for perfect

alignment regardless of what the mouse acceleration settings on the server are.

The CS1708i supports the highest security protocols, such as 128 bit SSL encryption for the

browser, and RC4 128 bit encryption for secure keyboard, mouse, and video data transmission.

For easier and more efficient user management integration, the CS1708i also supports

authentication and authorization via remote servers, such as RADIUS, LDAP, LDAPS, and MS

Active Directory.

These powerful features not only help administrators manage their server room in an efficient

and flexible manner, they provide a cost effective management solution for the SMB sector.

Features

Management

Other manuals for ATEN CS1708i

User Manual216 pages

Quick Start Guide2 pages

Questions and Answers:

R
ronald53Sep 5, 2025
What to do if Windows Client won't connect to ATEN Matrix Switcher CS1708i / CS1716i?
- T
  Terri WebbSep 6, 2025
  Ensure that DirectX 8.0 or higher is installed on your computer.
R
rosemariahSep 4, 2025
Why Windows Menu key has no effect on ATEN CS1708i Switch?
- M
  Melissa WagnerSep 5, 2025
  If pressing the Windows Menu key has no effect when using the ATEN Switch, it is because Java doesn't support the Windows Menu key.
T
Tiffany ButlerAug 23, 2025
What to do if ATEN Switch CS1708i / CS1716i loses network after reset?
- J
  Joshua NewmanAug 23, 2025
  If your ATEN Switch CS1708i / CS1716i experiences a sudden loss of network connection due to a local reset, close your current connection. Wait about 30 seconds, and then log in again.
A
amandamoodySep 2, 2025
How to display national language characters on ATEN CS1708i?
- J
  James LopezSep 3, 2025
  If national language characters do not appear when using the ATEN Switch and your local keyboard is set to a non-English national language layout, set the remote computer's keyboard layout to English.
B
benjamin61Sep 2, 2025
Why do all station IDs display as 01 on my ATEN CS1708i?
- M
  Maria KimSep 2, 2025
  If all Station IDs display as 01 on your ATEN Switch, it may be because Station 1 has suddenly lost power. Wait a few seconds for the system to reinitialize the station sequence and display the proper IDs.
R
Rebecca ThomasSep 1, 2025
What to do if mouse/keyboard not responding on ATEN CS1708i?
- R
  Ryan FloresSep 1, 2025
  If the mouse and/or keyboard are not responding due to an improper reset on your ATEN Switch, unplug the cable(s) from the console port(s), then plug them back in again.
J
Joseph SnyderAug 31, 2025
How to set fixed IP address on ATEN Switch CS1708i / CS1716i?
- P
  pedrorussellAug 31, 2025
  If the default network setting for the ATEN Switch CS1708i / CS1716i is DHCP, but the network uses fixed IP addresses and doesn’t have a DHCP server, use the local console OSD’s F4 function to give the CS1708i / CS1716i a fixed IP address.
W
Wesley HickmanAug 30, 2025
How to improve low resolution video in Panel Array Mode on ATEN CS1708i?
- A
  andrewleeAug 30, 2025
  If you are experiencing low resolution video in Panel Array Mode on your ATEN Switch, try increasing the number of panels that are displayed.
O
ohortonAug 29, 2025
How to sync remote mouse pointer on ATEN CS1708i Switch?
- A
  Alexandria WilsonAug 29, 2025
  If the remote mouse pointer is out of sync when using the ATEN Switch: 1. Use the AutoSync feature to sync the local and remote monitors. 2. If that doesn't resolve the problem, use the Adjust Mouse feature to bring them back in sync. 3. If the two methods described above fail to resolve the problem, use the Toggle Pointer Display function.
J
Jennifer BradleyAug 28, 2025
Why does the mouse pointer not move on my ATEN Switch?
- C
  Colin RobertsonAug 28, 2025
  If the mouse pointer does not move when using the ATEN Switch, it may be because if Mouse DynaSync™ is enabled, all computers connected to the switch must use USB Adapter Cables. Otherwise, the mouse pointer will not move.

ATEN CS1708i Specifications

General

I/O ports	1 x SPHD-18 M 8 x SPHD-17 F 1 x DB-25 M 1 x DC 1 x RJ-45 F 1 x RJ-11 1 x USB A
Color depth	24 bit
Ports quantity	8
RJ-12 ports quantity	0
Connectivity technology	Wired
Compatible operating systems	Windows, Mac OS X, Linux, Sun
DC-in jack	Yes
USB 2.0 ports quantity	1
Security algorithms	802.1x RADIUS, SSL/TLS
Power consumption (typical)	9.5 W
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	0 - 80 %
Cables included	KVM
Product color	Black
Housing material	Metal
Scan interval	255 s
Number of users	32 user(s)
Maximum resolution	2048 x 1536 pixels
Built-in display	No
Sustainability certificates	RoHS