ATEQ BH SENS DT41 - Program Universal Sensor

BH SENS DT41 – User Manual
UM-KJHU2-05-02 Page 18/41
3. PROGRAM UNIVERSAL SENSOR
This section explains how to get a sensor ID in order to enter it in a universal sensor. If the
"old" sensor can be read, use the COPY ORIGINAL SENSOR section to recover the ID. If
it cannot be read, use the CREATE NEW SENSOR section to create a new ID.
Select the sensor model.
= continue
The device displays
compatible sensor
reference.
= continue
Note: here is an example; please choose the right sensors.
Select the
"PROGRAM SENSOR"
function.
= continue