ATEQ BH SENS DT41 - Tool Settings and Configuration

BH SENS DT41 – User Manual
UM-KJHU2-05-02 Page 28/41
1.3. READ INSTRUCTIONS
Press and hold one of the
keyfob buttons.
To start a new
test.
= previous
➔ The device waits for RF signal.
1.4. TEST RESULTS
PASS: High signal
strength, green
range.
To start a new
test.
FAIL: Low signal
strength, indicates
low battery, less than
25%, replace battery
(recommended).
To start a new
test.