FG_D6_PROFIBUS_EN_01 / 2020-06-17
Results status: (@: 00h – 0Fh)
Echo: Acknowledgement of delivery of the master command allowing to determinate in which state
is the slave (current command or command realised).
Error code: In case of command execution error, the corresponding command error bit is activated.
Bit 2 = 1 > Echo special cycle.
Bit 3 = 1 > Echo program selection.
Bit 4 = 1 > Echo reading of the results FIFO.
Bit 5 = 1 > Echo reading of the parameters.
Bit 6 = 1 > Echo writing of the parameters.
Bit 7 = 1 > Echo reset of the results FIFO.
Bit 0 = 1 > Echo reading of the instrument configuration.
Bit 1 = 1 > Echo reading of the configuration / extended menu bits.
Bit 2 = 1 > Echo reading of the function bits.
Bit 3 = 1 > Echo writing of the configuration / extended menu bits.
Bit 4 = 1 > Echo writing of the function bits.
Bit 5 = 1 > Echo reading of the program name.
Bit 6 = 1 > Echo writing of the program name.
Bit 7 = 1 > Echo reading last result.
Bit 2 = 1 > Special cycle error.
Bit 3 = 1 > Program selection error.
Bit 4 = 1 > Reading of the results FIFO error.
Bit 5 = 1 > Reading of the parameters error.
Bit 6 = 1 > Writing of the parameters error.
Bit 7 = 1 > Reset of the results FIFO error.
Bit 0 = 1 > Reading of the instrument configuration error.
Bit 1 = 1 > Reading of the configuration bits error.
Bit 2 = 1 > Reading of the function bits error.
Bit 3 = 1 > Writing of the configuration bits error.
Bit 4 = 1 > Writing of the function bits error.
Bit 5 = 1 > Reading of the program name error.
Bit 6 = 1 > Writing of the program name error.
Bit 7 = 1 > Reading last result error.
Number of results in FIFO (quantity of available results recorded in the FIFO).
Type of test in progress.
To Next Page
Loading...
