® Copyright ATH-Heinl GmbH & Co. KG, 2019, All rights reserved / Misprints and technical changes reserved / As of: 2019-01
Manufacturer ATH-Heinl GmbH & CO.KG
- 5 -
1.2.2. Safety Equipment Description
The tyre changer has the following safety features
WARNING!!
Removal and manipulation of the machine's safety equipment
violates European safety regulations and absolves the manufacturer of any
liability.
Check valve for the clamping cylinder of the 4-jaw
clamping unit (swivel connection)
Double seal check valve on the lift cylinder of the
boom.
Pressure relief valve with factory setting of 160 bar
± 5%
This limits the hydraulic pressure and is adjustable.
Overload protection for hydraulic motor (in the
electrical control box).
This cuts off the power supply when the engine
overheats
Mechanical locking of the tool arm
To Next Page
Loading...