Athena A228 User Manual

A228/A248/A228I/A248I User’s manual
21
Guidance and manufacturer’s declaration – electromagnetic emissions
The model A228/A248/A228I/A248I is intended for use in the
electromagnetic environment specified below. The customer or the user of
the model A228/A248/A228I/A248I should assure that it is used in such an
environment.
For transmitters rated at a maximum output power not listed above, the
recommended separation distanced in meters (m) can be estimated
using the equation applicable to the frequency of the transmitter, where
P is the maximum output power rating of the transmitter in watts (W)
according to the transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher
frequency range applies.
NOTE 2 These guidelines may not apply in all situations.
Electromagnetic propagation is affected by absorption and reflection
from structures, objects and people.
Guidance and manufacturer’s declaration – electromagnetic immunity
The model A228/A248/A228I/A248I is intended for use in the
electromagnetic environment specified below. The customer or the user of
the model A228/A248/A228I/A248I should assure that it is used in such an
environment.
Immunity test
IEC 60601 test
level
Complia
nce
level
Electromagnetic
environment – guidance
Electrostatic
discharge
(ESD)
IEC 61000-4-2
6 kV contact
8 kV air
6 kV
contact
8 kV air
Floors should be wood,
concrete or ceramic tile. If
floors are covered with
synthetic material, the
relative humidity should
be at least 30 %.

Athena A228 Specifications

General

Brand	Athena
Model	A228
Category	Touch Panel
Language	English