29
TVs (and VCRs) have a Composite video input, in
which case you can use an S-Video-to-Composite
adapter. If your TV has cable input only, you can
connect your card to your TV through your VCR or
an RF modulator (available in most electronics
stores).
Connecting Your S-Video Out to a TV or VCR
1
Turn off your PC and your TV (or VCR).
2
Ensure your card was installed correctly as per
the Getting Started Guide.
3
Determine if your TV (or VCR) has an S-Video
or Composite video connection.
4
Looking at the back of your PC, locate your S-
Video Out. Using an S-Video cable (or S-Video-
to-Composite adapter), attach one end of the
cable to your graphics card and the other to your
TV (or VCR). Refer to the illustration for further
help.
5
Turn on your PC and your TV (or VCR).
S-Video Out
TV or VCR
PC
S-Video In
OR
Composite In
S-Video Cable
OR
S-Video-to-Composite Adapter
NOTE: Newer TVs may have
the Video Input on the front
panel
To Next Page
Loading...
Need help?
General
