ATIMA AY3000i - Troubleshooting

A ENGINE DOES NOT START
B
P OK
O Clogged
C Does not flicker D Flickers.
Turn the engine switch to “ON”, then pull
the recoil starter and check if the oil
warning light flickers.
H
Pull the recoil starter and check the
spark plug for spark strength.
(See “ WARNING ”)
To prevent FIRE HAZARDS be
sure fuel is not present in the
spark plug area.
To prevent FIRE HAZARDS be
sure to place the spark plug as far
away as possible from the spark
plug hole and carburetor area.
To prevent ELECTRIC SHOCK do
not hold spark plug lead with
hand while testing.
WARNING
Does not spark
I J
Check the following
Fuel line clogging
Air cleaner element
clogging.
N
Clean or replace; Consult an
Q
R Consult an
L Incorrect M OK
Replace or
adjust gap.
Clean the spark
plug.
F OK G Level low
Consult an
Add engine oil.
OK
E Check engine oil level.
K Check the spark plug.
9 Type: BPR4ES
9 Gap: 0.7–0.8 mm (0.028–0.031 in)
TROUBLESHOOTING
35
ATIMA seller
ATIMA seller
ATIMA seller