What to do if I see a legionella cycle error on my Atlantic WOYA060KLT?
A Legionella cycle error in your Atlantic Heat Pump may occur if the DHW back-up is disconnected. Reconnect the DHW back-up to resolve this issue.
General| Refrigerant | R32 |
|---|---|
| Heating Capacity | 6.0 kW |
| Energy Efficiency Ratio (Cooling) | 3.21 |
| Operating Temperature Range (Heating) | -15°C to 24°C |
| Power Supply | 220-240V, 50Hz, 1Ph |
| Dimensions (Outdoor Unit) | 800x333x554 mm |
| Type | Air-to-Air Heat Pump |
The heat pump installation must meet the requirements related to the location of the heat pump.
The electrical installation must be carried out in accordance with current regulations.
Filling the installation with gas.
Start-up check-list.
This heat pump provides: Heating in winter, ...
Maximum operating pressure heating / hot water tank...
Outdoor temperature min/max, Max. heating water flow temperature...
Bend the pipes into position and make holes for them...
Choose the location of the appliance after discussion with the client.
Connections must be made on the same day the installation is filled with gas.
The sealing test must be carried out using a certified gas detector...
Before connecting the hydraulic unit to the installation, rinse out the heating system correctly...
Displays the user interface screens.
Steps for initial setup.
Overview of menu options.
Managing anti-legionella cycles.
Shows status of functions and actuators.
Function for drying concrete floors.
Lists and explains faults related to the hydraulic unit.
Procedure for filling the system with gas.
Checklist for starting up the unit.
To Next Page
