These declared values were obtained by laboratory type testing in accordance with the stated directive or
standards and are suitable for comparison with the declared values of other tools tested in accordance with
the same directive or standards. These declared values are not suitable for use in risk assessments and values
measured in individual work places may be higher. The actual exposure values and risk of harm experienced
by an individual user are unique and depend upon the way the user works, in what material the machine is
used, as well as upon the exposure time and the physical condition of the user, and the condition of the machine.
We, Atlas Copco Construction Tools AB, cannot be held liable for the consequences of using the declared
values, instead of values reflecting the actual exposure, in an individual risk assessment in a work place situation
over which we have no control.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed. An EU guide to managing
hand-arm vibration can be found at http://www.humanvibration.com/humanvibration/EU/VIBGUIDE.html
We recommend a programme of health surveillance to detect early symptoms which may relate to vibration
exposure, so that management procedures can be modified to help prevent future impairment.
Noise and vibration data
VibrationNoise
Declared valuesDeclared values
Three axes valuesSound powerSound pressure
ISO 5349-2ISO 15744EN ISO 11203
B
m/s
2
spreads
A
m/s
2
value
Lw
guaranteed dB(A) rel
1pW
Lp
r=1m dB(A) rel
20µPaType
-16.6122111BBC 16W
-16.6114103BBC 16WS
-20.4127116BBC 34W
-20.4120109BBC 34WS
-20.4127116BBC 34WTH
Optional equipment
Part numberQuantityRemarkDescription
8202 5102 391For mineral and synthetic oilLubricator CLG 30, European type claw couplings
8202 5102 401For mineral and synthetic oilLubricator CLG 30, US type claw couplings
8202 5102 051For mineral oilLubricator BLG 30, European type claw couplings
8202 5102 141For mineral oilLubricator BLG 30, US type claw couplings
8092 0110 821Airflow <120 l/s (254 ft
3
/min)Water separator VAM 5A, European type claw couplings
8092 0110 831Airflow <120 l/s (254 ft
3
/min)Water separator VAM 5A, US type claw couplings
9000 0326 001Ø 25 mm (Ø 1 in.)Hose nipple
9030 2051 001Ø 25 mm (Ø 1 in.), 3 m (10 ft)Rubber hose, pre-mounted with European type claw
couplings
© 2012 Atlas Copco Construction Tools AB | No. 9800 0627 71f | 2012-06-30
Original instructions
26
BBC 16W, 16WS, 34W, 34WS, 34WTHSafety and operating instructions