Atlas Copco CC 1700 U - Page 34

♦
Tighten all Allen screws (S) to the tightening torque
required (see chapter Bolted
connections/Tightening torques).
1.
3.
2.
CE
D
1.
♦
Remove the spring retainer pins (B) from the lock
pins (A).
♦
Remove the lock pins (A) which fix the hydraulic
cylinders.
A
B
♦
Lubricate the hydraulic demolition cutter (see
chapter Lubrication).
♦
Store the disassembled cutter jaw pair safely (see
chapter Storage).
© 2015 Construction Tools GmbH | No. 3390 5141 01 | 2015-11-16
Original instructions
34
CC 1700 U, 1700 SINSTALLATION