Atlas Copco ETP SRB81-1300-20-HA-D - Page 10

Service EN ETP SRB81-1300-20-HA-D
10
© Atlas Copco Industrial Technique AB - 9839 1649 01
3. Remove the screws.
4. Remove the lid and detach the cables.
5. Pull out the dual trigger.
Dismantling the Power Module
1. Remove the screws and pull out the power module.
Dismantling the HMI
1. Remove the screws and the back cover.
2. Pull out the HMI and detach the cable.