Atlas Copco ETP SRB81-1300-20-HA-D - Page 11

ETP SRB81-1300-20-HA-D EN Service
© Atlas Copco Industrial Technique AB - 9839 1649 01
11
Dismantling the Handle
1. Remove the screws to remove the handle.
Dismantling the Start Trigger
1. Lightly press the trigger (A) and push out the locking pin (B) using a tweezer.
2. Use pliers to remove the locking pin.
3. Remove the start trigger.
Dismantling the Function Button and Configuration Board
1. Lift the function button from the slot to remove it.
2. Lift the configuration board to remove it.