Atlas Copco ETP SRB81-1300-20-HA-D - Page 12

Service EN ETP SRB81-1300-20-HA-D
12
© Atlas Copco Industrial Technique AB - 9839 1649 01
Dismantling the Main Board
1. Remove the screw to be able to remove the main board.
Dismantling the Internal Gear
1. Remove the screws, followed by the internal gear and the intermediate shaft.
2. Remove the screws to be able to pull out the gear identification board.
Dismantling the Front Bearing Shield
1. Remove the screws to remove the bearing shield.