Atlas Copco ETP SRB81-1300-20-HA-D - Page 16

Service EN ETP SRB81-1300-20-HA-D
16
© Atlas Copco Industrial Technique AB - 9839 1649 01
Assembling the Commutation Board
1. Insert the commutation board.
2. Tighten the screws to fasten the locking ring.
Assembling the Front Bearing Shield
1. Insert the wave spring.
2. Install the bearing shield. And feed the cable through the channel to be able to attach it.
3. Tighten the screws.