Atlas Copco ETP SRB81-1300-20-HA-D - Page 17

ETP SRB81-1300-20-HA-D EN Service
© Atlas Copco Industrial Technique AB - 9839 1649 01
17
Assembling the Internal Gear
1. Insert the gear identification board.
2. Insert internal gear. And feed the cable through the channel.
3. Tighten the screws to fasten the internal gear.
Assembling the Main Board
1. Tighten the screw to fasten the main board.
Assembling the Function Button and Configuration Board
1. Insert the configuration board and attach the cable.
2. Insert the function button into the slot.