Atlas Copco ETP SRB81-1300-20-HA-D - Page 18

Service EN ETP SRB81-1300-20-HA-D
18
© Atlas Copco Industrial Technique AB - 9839 1649 01
Assembling the Start Trigger
1. Place the start trigger in the slot.
2. Slightly press the trigger (A) and insert the locking pin (B) with pliers.
Assembling the Handle
1. Tighten the screws to attach the handle.
Assembling the HMI
1. Install the HMI and attach the cable.
2. Install the back cover and fasten the screws.