Atlas Copco ETP SRB81-1300-20-HA-D - Page 19

ETP SRB81-1300-20-HA-D EN Service
© Atlas Copco Industrial Technique AB - 9839 1649 01
19
Assembling the Power Module
1. Install the power module and tighten the screws.
Assembling the Dual Trigger
1. Install the dual trigger and feed the cable through the channel.
2. Attach the cables on the front lid.
3. Tighten the screws to fasten the front lid.
4. Turn the dual trigger to the correct position.
5. Tighten the locking screw of the trigger.