Atlas Copco QAX 30 Dd S3A APP User Manual

- 42 -
Maintenance schedule Daily
50 km
after initial
start-up
Every
500 km
Every
1000 km
Every
2000 km
Yearly
Check tyre pressure x x x x
Check tyres for uneven wear xx
Check torque of wheel nuts x x x
Check coupling head x xx
Check height of adjusting facility x x
Check towbar handbrake lever spring actuator,
reversing lever, linkage and all movable parts for ease
of movement"
xx x x x
Grease coupling head, towbar bearings at the housing
of the overrun brake
xxx
Check brake system (if installed) and adjust if
necessary
xxx
Oil or grease brake lever and moving parts such as
bolts and joints
xxx
Grease sliding points on height adjusting parts xx
Check safety cable for damage xx
Check Bowden cable on height adjustable connection
device for damage
xx
Lubricate torsion bar axle trailing arm xx
Check brake lining wear x
Change wheel hub bearing grease x
Check/Adjust lateral play of wheel bearing
(conventional bearing)
xxx

Atlas Copco QAX 30 Dd S3A APP Specifications

General

Brand	Atlas Copco
Model	QAX 30 Dd S3A APP
Category	Inverter
Language	English