Atlas Copco XAHS 146 Dd S3A APP User Manual

- 33 -
Maintenance
USE OF SERVICE PAKS
Service Paks include all genuine parts needed for
normal maintenance of both compressor and engine.
Service Paks minimize downtime and keep your
maintenance budget low.
Order Service Paks at your local Atlas Copco dealer.
The schedule contains a summary of the maintenance
instructions. Read the respective section before taking
maintenance measures.
When servicing, replace all disengaged packings, e.g.
gaskets, O-rings, washers.
For engine maintenance refer to Engine Operation
Manual.
The maintenance schedule has to be seen as a
guideline for units operating in a dusty environment
typical to compressor applications. Maintenance
schedule can be adapted depending on application
environment and quality of maintenance.
PREVENTIVE MAINTENANCE SCHEDULE FOR THE COMPRESSOR
Maintenance schedule Daily 50 hours after
initial start-up
Every 500 hours Every 1000 hours
Service Paks
XAHS 146 Dd - XAHS 300 DD6 Deutz TCD 2912 4499 05 2912 4501 06
XATS 156 Dd - XATS 350 DD6 Deutz TCD
XA(S) 186 Dd - XA(S) 375 DD6 Deutz TCD
2912 4499 05 2912 4502 06
XATS 156 Dd - XATS 350 DD6 Deutz BF4M
XA(S) 186 Dd - XA(S) 375 DD6 Deutz BF4M
2912 4306 05 2912 4337 06
XAVS 166 Dd - XAVS 340 DD6 Deutz TCD
XAHS 186 Dd - XAHS 375 DD6 Deutz TCD
2912 4500 05 2912 4503 06
Oil Separator Kit 2911 0075 00
Engine oil level Check
Compressor oil level Check
Coolant level (3) Check
Coolant (7) Analysis Analysis
Air filter vacuator valves Empty
Fuel filter water drain Drain
(to be continued on page 34)

Atlas Copco XAHS 146 Dd S3A APP Specifications

General

Brand	Atlas Copco
Model	XAHS 146 Dd S3A APP
Category	Air Compressor
Language	English