- 5 -
Preface
Please read the following instructions carefully
before starting to use your machine. Follow the
instructions in this booklet and we guarantee you
years of troublefree operation.
Always keep the manual available near the machine.
In all correspondence always mention the
compressor type and serial number, shown on the
data plate.
The company reserves the right to make changes
without prior notice.
Table of contents
1 Safety precautions for portable
compressors 7
1.1 Introduction .................................................. 7
1.2 General safety precautions ........................... 8
1.3 Safety during transport and installation ....... 9
1.4 Safety during use and operation ................... 9
1.5 Safety during maintenance and repair........ 11
1.6 Tool applications safety ............................. 12
1.7 Specific safety precautions......................... 13
2 Leading particulars .................................. 14
2.1 Description of safety pictograms used in this
manual 14
2.2 General description .................................... 14
3Main Parts................................................. 16
3.1 Compressor regulating system ................... 20
3.1.1 Overview (Load condition)................... 20
3.1.2 Air flow .................................................. 21
3.1.3 Oil system .............................................. 21
3.1.4 Continuous regulating system................ 22
3.2 Electrical system ........................................ 24
3.2.1 Dip switches for
XAHS 146 Dd, XATS 156 Dd and XA(S)
186 Dd 25
3.2.2 Dip switches for
XAVS 166 Dd and XAHS 186 Dd 25
3.3 Markings and information labels ............... 26
4 Operating instructions ............................. 27
4.1 Parking, towing and lifting instructions..... 27
4.1.1 Parking instructions ............................... 27
4.1.2 Towing instructions ............................... 28
4.1.3 Height adjustment .................................. 29
4.1.4 Instructions ball coupling (option)......... 30
4.1.5 Lifting instructions................................. 30
4.2 Starting/Stopping ....................................... 31
4.2.1 Before starting ....................................... 31
4.2.2 Control panel ......................................... 31
4.2.3 During operation .................................... 32
5 Maintenance ............................................. 33
5.1 Use of service paks .................................... 33
5.2 Preventive maintenance schedule for the
compressor 33
5.3 Fuel............................................................. 36
5.4 Lubrication oils .......................................... 36
5.5 Oil level check ........................................... 38
5.5.1 Check engine oil level ........................... 38
5.5.2 Check compressor oil level.................... 38
5.6 Oil and oil filter change ............................. 39
5.6.1 Engine oil and oil filter change.............. 39
5.6.2 Compressor oil and oil filter change...... 39
5.7 Coolant specifications ................................ 40
5.7.1 PARCOOL EG ...................................... 40
5.7.2 Handling PARCOOL EG ...................... 41
5.8 Coolant check............................................. 41
5.9 Topping up/replacing coolant .................... 41
5.9.1 Topping up without draining from the
cooling system 42
5.9.2 Topping up after limited quantity draining
from the cooling system 43
5.9.3 Replacing the coolant ............................ 44
5.10 Cleaning coolers......................................... 44