Atlas Copco XAHS 146 Dd S3A APP User Manual

- 37 -
*
If you want to use another brand of oil,
consult the Engine Operation Manual.
**
It is strongly recommended to use Atlas
Copco branded lubrication oils for both
compressor and engine. If you want to
use another brand of oil, consult Atlas
Copco.
Never mix synthetic with mineral oil.
Remark:
When changing from mineral to
synthetic oil (or the other way around),
you will need to do an extra rinse:
After doing the complete change
procedure to synthetic oil, run the unit
for a few minutes to allow good and
complete circulation of the synthetic oil.
Then drain the synthetic oil again and
fill again with new synthetic oil. To set
correct oil levels, proceed as in normal
instruction.
Mineral compressor oil PAROIL M
Synthetic compressor oil PAROIL S
Mineral engine oil PAROIL 15W40
Synthetic engine oil PAROIL 5W40
Liter US gal Order number
can 5 1.3 1615 5947 00
can 20 5.3 1615 5948 00
barrel 210 55.2 1615 5949 00
Liter US gal Order number
can 5 1.3 1615 5950 01
can 20 5.3 1615 5951 01
barrel 210 55.2 1615 5952 01
container 1000 265 1604 7422 00
Liter US gal Order number
can 5 1.3 1615 5953 00
can 20 5.3 1615 5954 00
barrel 210 55.2 1615 5955 00
Liter US gal Order number
can 5 1.3 1604 6060 01
can 20 5.3 1604 6059 01

Atlas Copco XAHS 146 Dd S3A APP Specifications

General

Brand	Atlas Copco
Model	XAHS 146 Dd S3A APP
Category	Air Compressor
Language	English