Atlas Copco XAS 127 Kd User Manual

- 36 -
Notes
Maintenance schedule (hrs)
(continuation of page 35)
Daily 50 hrs
after initial
start-up
Every
500 hrs
Every
1000 hrs
Yea rl y
Analyse Coolant (4) (8) x
Measure alternator insulation resistance (on optional generatorset) x
Check rubber flexibles (11) x
Check emergency stop x
(to be continued on page 37)
1. More frequently when operating in a dusty environment.
2. Refer to engine operation manual.
3. After a day’s work.
4. Yearly is only valid when using PARCOOL. Change coolant every 5 years.
5. Use Atlas Copco oil filters, with by-pass valve as specified in the parts list.
6. Gummed or clogged filters means fuel starvation and reduced engine performance.
7. See section Lubrication oils.
8. Check inhibitors and freezing points using tools
 2913 0028 00 : refractometer
 2913 0029 00 : pH meter.
9. See section Safety valve.
10. See section Before starting.
11. Replace all rubber flexibles every 6 years.
For other specific engine and alternator requirements refer to specific manuals.
12.Note not applicable.
Keep the bolts of the housing, the lifting
eye, the towbar and the axle securely
tightened.
Refer to section Technical specifications
and section Height adjustment for the
torque values.
aerocompressors.ru

Atlas Copco XAS 127 Kd Specifications

General

Brand	Atlas Copco
Model	XAS 127 Kd
Category	Air Compressor
Language	English