- 30 -
1. More frequently when operating in a dusty
environment.
2. Replace the element when the pressure drop exceeds
11.5 psi.
3. Refer to the Kubota instruction manual
Lubrication oils
It is strongly recommended to use Atlas Copco branded
lubrication oils for compressor.
Compressor oil
Engine oil
Engine coolant
* Keep the bolts of the housing, the lifting
eye, the towbar and the axle securely
tightened. Refer to Compressor/Engine
Specifications for the torque values.
PAROIL - M (Mineral base)
Order number
1 gallon pail: 1615 5947 00
5 gallon pail: 1615 5948 00
55 gallon drum: 1615 5949 00
PAROIL - S (Synthetic)
Order number
1.3 gallon pail: 1630 0160 00
5 gallon pail: 1630 0161 00
55 gallon drum: 1630 0162 00
264 gallon container: 1630 0163 00
PAROIL - EXTRA 5W40 (Synthetic)
Order number
1.3 gallon (5 Liter) Container: 1630 0135 01
5 gallon (20 Liter) Pail: 1630 0136 01
PAROIL - E (15W40)
Order number
1.3 gallon (5 Liter) Container: 1615 5953 00
5 gallon (20 Liter) Pail: 1615 5954 00
55 gallon ( 209 Liter) Drum: 1615 5955 00
PARCOOL - EG
Order number
1.3 gallon container: 1604 5308 01
5 gallon pail: 1604 5307 02
55 gallon drum: 1604 5306 01
Concentrate 5 l can: 1604 8159 01
(1) Additional equipment is needed to run the compressor below 18°F. Please contact Atlas Copco for more
information about Cold Weather Packages
Temperature Range Type of Oil
Compressor Engine
Between -13°F and 122°F
(1)
PAROIL S See Engine Operation Manual
Between 18°F and 104°F
PAROIL M 15W-40
Operation of compressor in ambient temperatures lower than 18°F (-8°C) without the correct
type of oil will void your warranty and may result in element failure and/or fire.
To Next Page
Loading...
Need help?
General
