- 25 -
TOWING INSTRUCTIONS
Label on towbar, towing instructions Towing position of jockey wheel
Before towing the compressor, make
sure that the towing equipment of the
vehicle matches the towing eye or ball
connector, and make sure that the hood
is closed and locked properly.
(1) (1)
Adjusta
ble towbar with support leg and brakes
For both non-adjustable and adjustable towbar, the
towbar should be as level as possible and the
compressor and towing eye end in a level position.
Apply the brakes by pulling hand brake lever. Secure
support leg (1) in the highest possible position.
Tighten the towbar joints after first 50 km to 250 Nm.
To Next Page
Loading...