- 36 -
Maintenance
PREVENTIVE MAINTENANCE SCHEDULE
The schedule contains a summary of the maintenance instructions. Read the
respective section before taking maintenance measures.
When servicing, replace all disengaged packings, e.g. gaskets, O-rings, washers.
For engine maintenance refer to Engine Operation Manual.
The maintenance schedule has to be seen as a guideline for units operating in a
dusty environment typical for compressor applications. Maintenance schedule can
be adapted depending on application environment and quality of maintenance.
USE OF SERVICE PAKS
Service Paks include all genuine parts needed for normal maintenance of both
compressor and engine.
Service Paks minimize downtime and keep your maintenance budget low.
Order Service Paks at your local Atlas Copco dealer.
LIABILITY
The manufacturer does not accept any liability for any damage arising from the use
of non-original parts and for modifications, additions or conversions made without
the manufacturer’s written approval.
DAILY MAINTENANCE COMPRESSOR BEFORE STARTING A JOB
Unauthorised modifications can result in
injuries or machine damage.
Always keep the machine tidy to prevent
fire hazard.
Poor maintenance can void any
warranty claims.
The operator is only allowed to execute
the daily maintenance. All other
maintenance/repair is to be done by
authorized personnel.
Drain condensate and water from spillage-
free frame
see Spillage-free frame
Empty air filter vacuator valves see Air filter engine/
compressor
Check engine oil level (if necessary top up) see Engine oil level check
Check compressor oil level (if necessary top
up)
see Compressor oil level check
Check coolant level see Coolant level check
Check/Fill fuel level after a day’s work
Check on abnormal noise
Check control panel see Control panel
Check the max. pressure of the tool and hoses
against max. vessel pressure.
To Next Page
Loading...