- 34 -
GENERATOR (OPTION)
Socket panel - 6.5kVA 110V
Socket panel - 230/400V
The built-in generator is driven by a multi V-belt
drive. The generated current can be drawn via
3 sockets (see chapter Technical specifications). The
generator is also equipped with an automatic/manual
control system to save fuel when no electric power is
used. The compressor and the generator may be used
simultaneously.
Reference Name
1Sockets
2 Manual switch control function
3 Terminal earth cable
(1)
(2)
(3)
Reference Name
1Sockets
2 Switch automatic control function
3 Terminal earth cable
Before switching on the generator,
always place the earth pin in position, if
the unit is equipped with an earth
leakage relay.
Check the cable connection between
earth pin and the GND-terminal on the
unit.
Avoid high inductive loads (e.g.
welding). High inductive loads can
damage the generator.
To Next Page
Loading...