- 39 -
Notes
Maintenance schedule (running hrs) 50 hrs after
initial start-
up
Every
250 hrs
Every
500 hrs
Every
750 hrs
Every
1000 hrs
Yearly 2 Yearly
Replace compressor oil filter(s)
(4)
xx
Change compressor oil
(1) (6)
xx
Replace air filter element
(1)
xxx
Measure alternator insulation resistance
(on optional genset)
x
Check electrolyte level and terminals of
battery
x
Test safety valve
(8)
x
Check emergency stop x
1. More frequently when operating in a dusty environment.
2. Refer to engine operation manual.
3. Yearly is only valid when using PARCOOL. Change coolant every 5 years.
4. Use Atlas Copco oil filters, with by-pass valve as specified in the parts list.
5. Gummed or clogged filters means fuel starvation and reduced engine performance.
6. See section Oil.
7. The following part numbers can be ordered from Atlas Copco to check on inhibitors and freezing
points
2913 0028 00: refractometer
2913 0029 00: pH meter
8. See section Safety valve.
9. Replace all rubber flexibles every 6 years, according to DIN 20066.
10. For other specific engine and alternator requirements refer to specific manuals.
Keep the bolts of the housing, the lifting eye,
the towbar and the axle securely tightened.
Refer to section Technical specifications for
the torque values.
To Next Page
Loading...