- 47 -
REPLACING THE COOLANT
Drain
Completely drain the entire cooling system.
Used coolant must be disposed of or recycled in
accordance with legislation and local regulations.
Flush
Flush twice with clean water. Used coolant must
be disposed or recycled in accordance with laws
and local regulations.
Determine the amount of PARCOOL EG
required, see Technical specifications, and pour
it into the radiator top tank.
It should be clearly understood that proper
cleaning reduces contamination risks.
In case of "other" coolant residues inside the
system, the coolant with the lowest properties
influences the quality of the ‘mixed’ coolant.
Fill
To assure proper operation and the release of
trapped air, run the engine until normal engine
operation temperature is reached. Turn off the
engine and allow to cool.
Recheck coolant level and add coolant mixture if
necessary.
Caution: Do not top up when the engine
is hot.
To Next Page
Loading...