- 76 -
STARTING / STOPPING VIA REMOTE
CONTROL
EMERGENCY STOP
When an emergency stop button (1) is pressed, power
to all outputs is terminated, by the emergency stop
itself (hardware) as well as by the software.
When the emergency stop button (1) is pressed the
operator can unlock the emergency stop by turning it
counterclockwise.
Always use the remote control function
in accordance to local/work area
legislation.
1 Start Engine
2 Stop Engine
3 Load/unload compressor
The emergency stop button is only to be
used in emergency situations; not for
stopping procedures.
To Next Page
Loading...
