3. For type
DC18S
DC20GS
DC22SX
DC25GS
DC32GS
DC40GS
DC30SE
The spherical space must be assembled in a way that ensures that the front section of the piece /10/ is
3 cm away from the front edge of the boiler frame.
CAUTION – do not turn the rear face /14/ when handling
4. For type
DC15E
5. For type
DC70S
Front shaped piece is removed during boiler clean-up. It is positioned on the front side of the
combustion chamber towards the door.
5. Boiler accessories
Steel brush with accessories 1 pc
Poker 1 pc
Filling-in valve 1 pc
Operating and maintenance instructions manual 1 pc
Draught regulator - HONEYWELL FR 124 (DC50SE excluded) 1 pc
Ashtray (only for DCxxGS, DC15E) 1 pc
10. Heatproof shaped piece
- Spherical space (L+R
side),
14. Heatproof shaped piece
- rear face with a rearward
recess
38. Spherical area
39. Combustion area
lining (2 x 2 piece)
Spherical area /38/ must be
pushed to the rear of combus-
tion area
31. Heatproof shaped piece
– half moon.
32. Heatproof shaped piece –
combustion area plate (2
pieces)
To Next Page
Loading...
