To Next PageTo Next PageWhat to do if my Atomik BarbWire Toy will not move?
If your Atomik Toy isn't moving, there are several potential causes. First, ensure that both the transmitter and the model have batteries installed. Check that the batteries are correctly installed. If the transmitter battery is weak, replace it with a fresh one. Also, check the model's battery; if it's a LiPO battery, try recharging it.
Why is there no control of my Atomik Toy?
If you have no control over your Atomik Toy, the most likely cause is a weak battery in the transmitter. Try installing a fresh battery to resolve this issue.
How to fix limited radio range on Atomik Toy?
If you are experiencing limited radio range with your Atomik Toy, the issue might be a weak battery in the transmitter. Replacing it with a fresh battery should improve the range.
Step-by-step guide for charging the LiPO battery pack, including LED indicators.
Details on connecting the charger and understanding LED status lights.
Essential safety precautions for handling and charging Lithium Polymer batteries.
Specific discharge rate limits for LiPO batteries during the break-in process.
Step-by-step guide for inserting and connecting the LiPO battery into the model.
How to control forward movement and stopping using the throttle trigger.
How to control the boat's direction using the steering wheel.
How to use steering trim to ensure the boat runs straight.
Atomik's warranty terms, coverage, and claim procedures.
User agreement to accept responsibility for risks associated with product use.
Information and compliance details related to FCC regulations for radio interference.
Disclaimer regarding manual accuracy and product variations.
General
