ATOMSTACK R3 User Manual

2.2 The 4PIN black plug wire is for the connection with Neje, Ortur engraver.
2.3 These 4PIN wire (white and black plug) is the our main connection wirefor the other brand engraver, you may try
one of them to connect. If it fails to connect, please change the order of wire, and the change
processing is in chart 4.16-4.17
4.16 Connection order of white plug wire 4.17 Connection order of black plug wire
4.13 Connection plug on rotary roller
4.14 White plug wire

ATOMSTACK R3 Specifications

General

Brand	ATOMSTACK
Model	R3
Category	Industrial Equipment
Language	English