ATON AH66T - Page 60

ATON AH66T INSTALLATION MANUAL
© ATON 2010 | All rights reserved. Page 59
Loudness Control
Description: Enables, disables or TOGGLES the Loudness EQ setting in a zone. Status can
be queried.
Examples:
&AH66,LUD,2,0<cr> Sets ZONE TWO (2) LOUDNESS (LUD) setting to OFF (0).
&AH66,LUD,5,1<cr> Sets ZONE FIVE (5) LOUDNESS (LUD) setting to ON (1).
&AH66,LUD,3,2<cr> TOGGLES (2) the LOUDNESS (LUD) setting of ZONE THREE (3).
&AH66,LUD 8,?<cr> QUERIES (?) the LOUDNESS (LUD) setting of ZONE EIGHT (8).
Possible QUERY responses are:*AH66,LUD,8,0 or *AH66,LUD,8,1 where 0=OFF and
1=ON.
Mute Control
Description: Mutes or un-mutes a zone, or TOGGLES the state. Status can be queried.
Examples:
&AH66,MUT,6,0<cr> Sets ZONE SIX (6) to UN-MUTED (0).
&AH66,MUT,2,1<cr> Sets ZONE TWO (2) to MUTED (1).
&AH66,MUT,3,2<cr> TOGGLES (2) the setting of ZONE THREE (3).
&AH66,MUT,5,?<cr> QUERIES (?) the setting of ZONE FIVE (5).
Possible QUERY responses are:*AH66,MUT,5,0 or *AH66,MUT,5,1 where 0=UN-MUTED
and 1=MUTED.
Prefix Command Parameter 1
Zone #
Parameter 2
Loudness State
&AH66 LUD 1-12 0/1/2/?
Prefix Command Parameter 1
Zone #
Parameter 2
Mute State
&AH66 MUT 1-12 0/1/2/?