ATON AH66T - Page 59

ATON AH66T INSTALLATION MANUAL
© ATON 2010 | All rights reserved. Page 58
Firmware Version
Description: Queries the Firmware Version of the chassis.
Examples:
&AH66,VER,1,?<cr> QUERIES (?) the FIRMWARE VERSION (VER) of CHASSIS
ONE (1).
&AH66,VER,2,?<cr> QUERIES (?) the FIRMWARE VERSION (VER) of CHASSIS
TWO (2).
Example query responses: *AH66,VER,1,0.2.0.1, or *AH66T,VER,2,0.2.0.1, where 0.2.0.1
is the current firmware.
IR Routing Control
Description: Links the IR Input of a zone to an IR Output. Status can be queried.
Examples:
&AH66,IRR,6,1<cr> Links the IR INPUT of ZONE SIX (6) to IR OUTPUT ONE (1).
&AH66,IRR,12,5<cr> Links the IR INPUT of ZONE TWELVE (12) to IR OUTPUT FIVE
(1).
&AH66,IRR,3,0<cr> “Un-Links” the IR INPUT of ZONE THREE (3) from ALL IR
outputs including the ALL IR Out ports.
&AH66,IRR,5,?<cr> QUERIES (?) the IR LINK (IRR) setting of ZONE FIVE (5).*
Example query responses: *AH66,IRR,5,101101, *AH66,IRR,5,000001, etc., where 1=IR
link to the port, 0=No IR link to the port. Information for all six
IR ports is reported. The first example shows port 1 is linked,
port 2 is not linked, ports 3 and 4 are linked, port 5 is not linked
and port 6 is linked.
Prefix Command Parameter 1
Chassis #
Parameter 2
&AH66 VER 1/2 ?
Prefix Command Parameter 1
Zone #
Parameter 2
IR Port
&AH66 IRR 1-12 0-6/?