ATON AH66T - Page 58

ATON AH66T INSTALLATION MANUAL
© ATON 2010 | All rights reserved. Page 57
Doorbell Control
Description: Activates, Deactivates or TOGGLES Page/Doorbell Audio Input. Status can be
queried.
Examples:
&AH66,DB,0<cr> Sets DOORBELL INPUT (DB) to OFF (0).
&AH66,DB,1<cr> Sets DOORBELL INPUT (DB) to ON (1).
&AH66,DB,2<cr> TOGGLES (2) DOORBELL INPUT (DB).
&AH66,DB,?<cr> QUERIES (?)DOORBELL INPUT (DB) status
Possible QUERY responses are:*AH66,DB,0 or *AH66,DB,1, where 0=OFF and 1=ON.
Doorbell and Page commands are separated because the volume for DOORBELL audio
and PAGE audio is independently set in the ATON configuration software.
Factory Default
Description: Sets all options back to the FACTORY DEFAULT settings.
Command:
&AH66,DEF<cr> Factory DEFAULTS (DEF) the chassis.
Prefix Command Parameter 1
Doorbell State
&AH66 DB 0/1/2/?
Prefix Command
&AH66 DEF