ATON AH66T - Page 77

ATON AH66T INSTALLATION MANUAL
© ATON 2010 | All rights reserved. Page 76
Group Select Command
Description: Selects a group of preset radio station. Status can be queried.
Examples:
&AH66,R1,GROUP,A<cr> Selects PRESET GROUP (GROUP) A (A) for CHASSIS
ONE’S (R1) tuner.
&AH66,R2,GROUP,B<cr> Selects PRESET GROUP (GROUP) B (B) for CHASSIS
TWO’S (R2) tuner.
&AH66,R1,GROUP,?<cr> QUERIES (?) the PRESET GROUP (GROUP) of CHASSIS
ONE’s (R1) tuner.
Possible responses are: *AH66,R1,GROUP,A, *AH66,R1,GROUP,B, *AH66,R1,GROUP,C,
*AH66,R1,GROUP,D
Metadata Call Letters Request Command*
Description: Requests RDS PI data containing the radio station Call Letters.
Example:
&AH66,R1,MDF,S,?<cr> Requests the CALL LETTERS (S) Metadata (MDF) for the
CHASSIS ONE (R1) tuner’s currently selected station.
Example responses: *AH66, R1,MDF,S,WKQQ, *AH66, R1,MDF,S,KTLA, etc.
*This data is only valid for North American stations.
Prefix TS Parameter 1
Group
Parameter 2
&AH66 R1/R2 GROUP A/B/C/D/?
Prefix TS Parameter 1 Parameter 2 Parameter 3
&AH66 R1/R2 MDF S ?