ATON AH66T INSTALLATION MANUAL
© ATON 2010 | All rights reserved. Page 75
Digit Selection
Description: Sends digits for direct tuning. Has a 5 second timeout.
Example:
&AH66,R1,DIGIT,1<cr> Selects DIGIT (DIGIT) ONE (1) for CHASSIS ONE’S (R1)
tuner.
&AH66,R1,DIGIT,0<cr> Selects DIGIT (DIGIT) ZERO (0) for CHASSIS ONE’S (R1)
tuner.
&AH66,R1,DIGIT,5<cr> Selects DIGIT (DIGIT) FIVE (5) for CHASSIS ONE’S (R1)
tuner.
&AH66,R1,DIGIT,1<cr> Selects DIGIT (DIGIT) ONE (1) for CHASSIS ONE’S (R1)
tuner.
Results: Tunes Chassis One’s Radio to 105.1.
Enter Command
Description: Sends the enter command.
Examples:
&AH66,R1,ENTER<cr> Sends the ENTER (ENTER) command to CHASSIS ONE’S
(R1) tuner.
&AH66,R2,ENTER<cr> Sends the ENTER (ENTER) command to CHASSIS TWO’S
(R2) tuner.
Results: Processes the previous command.
Prefix TS Parameter 1
Parameter 2
Digit
&AH66 R1/R2 DIGIT 0-9
Prefix TS Parameter 1
&AH66 R1/R2 ENTER
To Next Page
Loading...