ATON AH66T - Page 75

ATON AH66T INSTALLATION MANUAL
© ATON 2010 | All rights reserved. Page 74
Tuner Commands
Band Select Command
Description: Selects the band (AM/FM) for the tuner. Status can be queried
Examples:
&AH66,R1,BAND,AM<cr> Changes CHASSIS ONE’S (R1) radio BAND (BAND) to AM
(AM).
&AH66,R2,BAND,FM<cr> Changes CHASSIS TWO’S (R2) radio BAND (BAND) to FM
(FM).
&AH66,R1,BAND,?<cr> QUERIES (?) CHASSIS ONE’S (R1) radio BAND (BAND)
setting.
Possible query responses: *AH66,R1,BAND,AM, or *AH66T,R2,BAND,FM.
Cancel Command
Description: Clears any digits previously entered into memory.
Examples:
&AH66,R1,CANCEL<cr> Sends the CANCEL (CANCEL) command to CHASSIS ONE’S
(R1) tuner.
&AH66,R2,CANCEL<cr> Sends the CANCEL (CANCEL) command to CHASSIS TWO’S
(R2) tuner.
Results: Clears the previously digits.
Prefix TS Parameter 1 Parameter 2
&AH66 R1/R2 BAND AM/FM/?
Prefix TS Parameter 1
&AH66 R1/R2 CANCEL