Calls
11
4.3 End a call
4.3.1 End a call
Replace the handset on the hook or press J (for
handsfree operation).
The call is ended.
4.4 Recall
This option generates a Flash signal. When you
press
d, it sends a signal to the telephone
exchange to access the different modes of
operation. For example, it provides you with a quick
way to obtain a new dial tone after completing a call.
1. During a call, press
d.
The current call is ended. The screen shows
R
.
2. Dial a number or press a Direct Memory button
that has a stored number.
A new call is made.
Tip
If an empty Direct Memory button is pressed, you will
be prompted to store a new number. See “6.1.1
Manually add a Direct Memory” for details.
See “12.4 Recall Time” on how to change the Recall
time.
4.5 Redial List
This option lets you review and quickly dial a
number that you had previously dialled. The redial
memory stores the last 5 dialled numbers with 24
digits for each number. If the number is over 24
digits long, the first 24 digits will be stored to
memory.
4.5.1 Review Redial List
1. Press M.
2. Press
! or " to scroll through the list.
Aton_C29_EN.book Page 11 Monday, June 22, 2009 4:04 PM
To Next Page
Loading...