ATON C29 - Setting up the Telephone Unit; Connecting the Telephone Unit; Useful Tips for Using this Manual

First steps
5
2.2 Setting up the telephone unit
!
Set up the telephone on a flat, non-slip surface.
!
The phone’s feet do not usually leave any marks
on surfaces. However, due to the multitude of
different varnishes and polishes used on today’s
furnishings, the occurrence of marks on the
surfaces cannot be completely ruled out.
2.3 Connecting the telephone unit
1. Plug one end of the handset cord into the
handset socket and the other end into the
socket on the underside of the base unit marked
with
2. Plug one end of the telephone line cord into the
socket on the underside of the base unit marked
with and the other end into the telephone
wall socket.
3. Plug the AC adaptor into the socket on the
underside of the base unit marked with
and the other end into the wall outlet.
4. Switch on the power to power up the phone.
2.4 Useful tips for using this
manual
2.4.1 Step-by-step instructions
In this manual, step-by-step instructions for
accessing the phone functions are condensed into
the following format:
Press
P ) Phone Setting ) Date/Time
The arrow ) means:
Use the
! and " keys to scroll to a menu or
option and then press
e.
Therefore, the above example expanded in detail is
as follows:
1. Press
P.
2. Press
! or " until the display screen shows
the
Phone Setting menu.
3. Press
e to select the menu.
4. Press
! or " until display screen shows the
Date/Time option.
5. Press
e to select the option.
Aton_C29_EN.book Page 5 Monday, June 22, 2009 4:04 PM