ATON C29 - SMS Settings

Sending and Receiving SMS
26
Tip
You cannot use
Send option, if this SMS is without
the sending number in draft box. You need to use the
USE item to add the sending number.
9.4.2 Use Draft SMS
This option lets you edit a message from the Draft
message list and then send it.
1. Press
I ) Draft ) Select the entry
2. Press
e.
3.
Press ! or " until Use appears at the lowest line
of the display screen. Press
e .
This will bring you to “9.1 Write an SMS (and send/
store it)” with the SMS text automatically displayed
on the screen. You may edit the text and then send/
store it.
9.4.3 Delete Draft SMS
1. Press I ) Draft ) Select the entry
2. Press
e.
3.
Press ! or " until Delete appears at the lowest
line of the display screen. Press
e .
The SMS is deleted. The next SMS will be
displayed (if any).
9.5 SMS Settings
This option lets you set the SMS centre and other
SMS options.
1. Press
I ) SMS Setting
2. Press ! or " to scroll through the list.
9.5.1 SMS Centre
This option lets you set the SMS centre number
that is used for receiving and sending SMS.
1. Press
I ) SMS Setting ) SMS Centre
2. Select Receive to set the number for receiving
SMS, or select
Send to set the number for
sending SMS.
3. You will be prompted to edit the number. Edit it
if you need to, and press
e to save it.
9.5.2 SMS Storing
This option lets you set whether the SMS in Inbox
or
Outbox are automatically deleted after reading.
Aton_C29_EN.book Page 26 Monday, June 22, 2009 4:04 PM