5.8.1 STORE NUMBER IN DIRECT MEMORY KEY (M1)
• Press PRO
• Press ▲ 2 x to select “STORE NUMBER”
• Press to enter
• Enter telephone number to be stored
• Press DL to delete wrong entered digit
• Use ▲ and ▼ to move back and forward through number
• Press M1 key to Save
• You should see “Saved” on the screen.
• Press PB/D to leave menu
5.8.2 CHANGE 911 KEY
The 911 key is pre-programmed from the factory. If you need
to change the 911 key, you may program another number
following these steps:
• Press PRO
• Press ▲ 2 x to select “STORE NUMBER”
• Press to enter
• Enter telephone number to be stored
• Press DL to delete a wrong entered digit
• Use ▲ and ▼ to move back and forward through number
• Press 911 key to Save
• You should see “Saved” on the screen.
• Press PB/D to leave menu
Page 14
5.9 NAME RECORDING
Once a number / name is stored, you can record the name.
You can change the name you have recorded while storing a
number / name in previous Chapter.
• Press PRO
• Press ▲ 3 x to select “NAME RECORDING”
• Press to enter
• Use ▲ or ▼ to navigate through all stored numbers /
names
You will hear recorded name while navigating through
t h e stored contacts. Press DL to erase recording.
• When you have selected the contact, press, and hold
and wait for the beep - “VOICE” icon will
flash
• After the beep, say the name of stored contact
• Release the button to finish recording
• Press PB/D to leave menu
Maximum length of recording is ‘3’ seconds
5.10 RECORD MESSAGE
For SOS calls, the telephone will broadcast a standard pre-
recorded message unless you record your own message.
• Press PRO
• Press ▲ 4 x to select “RECORD MESSAGE”
• Press and hold , wait for beep – “VOICE” icon
will flash
• After the beep, record your message
• Release the button to finish recording
• Press PB/D to leave menu
The maximum length of recording is ‘20’ seconds
The default message is: “THIS IS AN EMERGENCY
CALL TO ACCEPT THIS CALL PRESS ZERO”
Page 15
To Previous Page
Loading...