EasyManua.ls Logo

Attop A8 User Manual

Default Icon
5 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1
2 3
Drone X1 Battery X2Phone clamp X1Remote X1
1
2
(1) Landing Gears Installing
Install landing gears to specified position
Install propeller guards to specified position
1. Package Contents
4. Remote Controller
3.Install
A8 Operation Manual
(Suitable for operation in calm and light winds)
Suitable for 14 years old and above
(3) Battery Installing
(2) Propeller Guards Installing
Insert the battery into specified
position.
Keep pressing the buckle of battery
case then pull the case to take it out,
insert 3xAAA battery into specified
position.
Remote Controller
Propeller# A
Propeller# A
Propeller# B
Propeller# B
Connect the battery with drone.
(1) Power switch
(2) Left joystick
(Altitude Control, L/R turning)
(3) Right joystick
(Movement Control)
(4) Left function switch
(Take off/Landing, Emergency stop)
(5) Right function switch
(Headless mode, Return)
(6) Take photo
(7) Video
(8) Speed switch
(9) 360° Stunt
Battery Case
2.Charging
Charging Guide for battery
1. Connect the USB cable with power supply, the USB LED solid on, indicate the
USB cable is power on.
2. Connect the battery with USB cable. When USB LED light is off, the battery is
charging. When USB LED light is on, the battery is fully charged.
3
1
2
5V
NoteUse an power supply with standard output voltage 5V and current greater than
or equal to 2A, otherwise there is a risk of overloading the USB cable and Battery.
The flight time is about 10 minutes and the charging time is about 120 minutes.
Screwdriver X1USB cable X1 Propeller guards X4
Spare propellers X2
AAA 1.5V
AAA 1.5V
AAA 1.5V
(4) Phone clamp installing
Put the phone clamp to specified position on the remote, and make sure
to fasten the phone clamp.
(2)
(4)
(6)
(8)
(9)
(7)
(5)
(3)
(1)
Low battery warning
When the drone is flying, the indicator lights on the drone are flashing, and the remote
control handle emits a "beep" alarm sound, indicating that the drone power is too low.
At this time, the drone needs to return and charge.
Customer Service Email : attop@afterservice.vip
www.attoptoys.com
Get Assistance & Extended Warranty
Use camera or QR scanner to scan
Or Visit: https://attop.afterservice.vip
Question and Answer IconNeed help?

Do you have a question about the Attop A8 and is the answer not in the manual?

Attop A8 Specifications

General IconGeneral
BrandAttop
ModelA8
CategoryDrones
LanguageEnglish

Summary

Charging

Remote Controller Overview

How to Fly

Motor Activation and Takeoff

Guide on activating motors and performing the initial takeoff.

Landing and Emergency Stop

Instructions for safe landing and immediate drone shutdown in emergencies.

Aircraft Functions

Flight Controls and Modes

Troubleshooting and FAQs

Common Issues and Solutions

Addresses common problems like no response, flashing lights, and motor issues.

Battery Usage Precautions

General Battery Safety

Guidelines for charging, handling, and storing rechargeable batteries.

Battery Maintenance

Advice on battery storage temperature, charging cycles, and long-term storage.

Safety and Precautions

General Flight Safety

Warnings about operating drones in safe environments and away from crowds.

Lithium Battery Safety

Precautions for using lithium batteries to prevent explosion or fire.

Environmental Precautions

Advice to keep the drone away from moisture and heat sources.

WIFI Live Stream Camera Setup

Connecting to WIFI Signal

Steps to download app, power drone, and connect to drone's WIFI signal.

App Operation Modes

Control with Your Device

Instructions for operating the drone using the mobile app interface.

Remote Control Operation

Related product manuals