Do you have a question about the Attop F16 and is the answer not in the manual?
Type | Quadcopter |
---|---|
Model | F16 |
Frequency | 2.4GHz |
Gyro | 6-axis |
LED Lights | Yes |
Headless Mode | Yes |
One Key Takeoff/Landing | Yes |
Altitude Hold | Yes |
3D Flips | Yes |
Battery | 3.7V LiPo |
FPV Distance | 30 meters |
Channels | 4 |
Speed Modes | 3 |
Key details on drone weight, flight time, altitude, battery capacity, voltage, and type.
Information on controller frequency, transmission distance, and camera resolution, lens.
Input and output voltage and current details for the battery charger.
Explains functions of buttons like return, headless, speed switch, and joysticks.
Describes the symbols and information shown on the remote control's screen.
Instructions for installing batteries into the remote control.
Steps for charging the drone's battery using a USB cable.
How to install the charged battery into the aircraft and power it on.
Guidance on correctly installing the drone's propellers.
Steps for setting up the mobile phone rack, grips, and initial pairing.
Procedure for calibrating the drone's gyroscope for stable flight.
Steps to calibrate the drone's geomagnetic sensor for accurate navigation.
Instructions for initiating takeoff and landing using a single button.
How to activate the emergency stop feature during flight.
Detailed explanation of how to use the joysticks for throttle, rotation, and directional flight.
Guide to activating and using headless mode for easier flight control.
How to change the drone's flight speed gears.
Instructions for adjusting the camera's angle up or down.
Explanation of the automatic obstacle avoidance feature in indoor mode.
How the drone automatically returns to its takeoff point.
Procedure for drone return when the remote control signal is lost.
Details on the drone's behavior during the first low voltage alert.
Explains the drone's actions during the second low voltage warning.
A table detailing common issues, their causes, and treatment modes.
Instructions for downloading the required mobile application.
Steps to connect your smartphone to the drone's Wi-Fi network.
Identifies and explains the various icons and functions within the app interface.
How to use the feature that makes the drone follow the user.
Instructions for setting up and executing flight paths with waypoints.
How to make the drone fly around a specific point of interest.
Using hand gestures to control camera and take photos/videos.
Accessing calibration, flight logs, and last recorded location via settings.