Owner’s Guide
12
ENGLISH
WARNING: To avoid damaging your floor, follow your floor supplier’s recommendations regarding floor tempera-
ture limits.
The minimum and maximum floor temperature limits are 5.0°C (41°F) and 28.0°C (82°F) by default.
To modify these limits, proceed as follows:
Switch the thermostat to Off.
Press and hold the button.
Switch the thermostat back to On.
Release the button when the minimum temperature limit (FL:LO) appears.
Set the minimum temperature limit using the buttons.
Press the button to display the maximum temperature limit (FL:HI).
Set the maximum temperature limit using the buttons.
Press Mode/Ret to return the thermostat to normal display.
NOTE: The thermostat will automatically return to normal display if no button is pressed for 60 seconds.
Floor temperature limits (AF mode only)
33-00221EFS_C.AUBE.book Page 12 Wednesday, January 20, 2021 11:17 AM
To Next Page
Loading...
Need help?
General
