Auber WS Series User Manual

16
+
End
b1
b2
C1
C2
F1
F2
P1
P2
End
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
saue
2
SET
80
SETSET
lock
Figure 11. Flow chart of saving a recipe.
6.2 Recall a recipe.
WARNING: You current program will be overwritten by the selected recipe. Please write it down
somewhere if it is important to you.
To recall a recipe, press and hold SET key for 3 seconds until the Parameter Window displays
“LoCK”. Release the SET. The display will show “0”. Use “+” and “-” keys to adjust the display to
1 and press SET. The display will show “rC” for a second and then the value “End”. If press SET
key now, you will exit this mode without overwriting any existing programs. This can prevent your
current program been accidently overwritten by a recalled program. Use “+” or “-” key to locate
recipe you want to recall. If you press “+” key repeatedly, you will see
“End”, ”b1”, ”b2”, ”C1”, ”C2”, ”F1”, ”F2”, ”P1”, and ”P2” one by one. After you locate the recipe that
you want to recall, press the SET key to select. Current program will be overwritten by the
selected program. Figure 12 shows the flow chart of how to recall a recipe.

Auber WS Series Specifications

General

Brand	Auber
Model	WS Series
Category	Controller
Language	English