Overview rear panel
The rear side of the WP523 contains an 8-pin Euro-Terminal Block connector, whereby the wall panel
should be connected to the RJ45 connector on the rear side of the speaker system. For more information
about how the connections should be made, refer to “Connecting” in Chapter 3 of this user manual.
Below the 8-pin connector is a jumper located, whereby the 12V phantom power for the microphone input
can be enabled. When the jumper is placed (standard with delivery), the 12V phantom power is enabled,
and can be disabled by removing the jumper.
8-pin Euro Terminal
Block connector
Phantom power
enabling jumper
To Next Page
Loading...