EasyManua.ls Logo

Audi A4 2014 - Page 100

Audi A4 2014
296 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
98 Transmis sion
@] Transmission malfunction: Limited driv-
ing fu nctionality
There is a syst em malf unction in t he transmis-
sion . The transmission is switch ing to emer-
gency mode. This mode only shifts into cer-
tain gears or will no longer shift at all. The en-
gine may stall . Drive to your authorized Audi
dealer or qualified repair facility immediate ly
to have the malfunction corrected .
@] l;I Transmission malfunction : No reverse
You can continue driving
S tr onic t ransm ission: There is a system mal-
function in the transmission. The transmis -
sion is switc hing to emergency mode. This
mode only shifts into certain gears or w ill no
longer shift at all. The engine may stall. You
cannot engage the reverse gear. Drive to your
author ized Audi dealer or qualif ied repair fa-
cility immediately to have the malf unction
corrected.
@] Transmission malfunction: Stop vehicle
and shift to park.
Do not cont inue driving. Select the P selector
lever position and see your authori zed Audi
dealer or qualified repair facility for assis-
tance .
@ Note
If the transmiss ion switches to emergency
mode, you should take the vehicle to an
author ized Audi dealers hip as soon as pos-
sible to have the condition corrected .
Selector lever emergency release
Applies to vehicles: with multitronic/5 tronic/t iptronic
If the vehicle 's power supply fails, the selec-
tor lever can be released in an emergency.
Fig. 108 Front center console: Removing t he as ht ray
inser t
Fig. 109 Selecto r lever e mergency release
.. To access the emergency release mecha-
nism,
remove the ashtray insert @ using the
release switch ®
c> fig. 108 .
... Loosen and remove the cap in the ashtray
mou nt .
1> You now have access to a pin. Using a screw-
driver or sim ilar object, press th e pin down
and hold it in t hat position ¢
fig. 109.
.,. Now press the release button and move the
selecto r lever to the N positio n.
The selecto r lever can only be moved from t he
P position if the key is in t he lock and the igni-
t ion is swit ched on. If the power supply f ails
(for example, the battery is discharged) and
the vehicle m ust be pushed or towed,
move
the selecto r lever to the N position first using
the emergency release.

Table of Contents

Related product manuals