124 Hom e lin k
Homelink
Universal remote
control
Description
Applies to vehicles: wit h Homeli nk
The HomeLink universal remote control can
be programmed with the remote control for
devices that are already present.
With Home Link, you can control devices such
as the garage door, security systems, house
lights, etc. comfortably from the inside of you
vehicle.
Homelink makes it possible for you to replace
three different remote controls from dev ices
in your home with one universal remote. This
feature works for most garage door and exte-
rior door motor signals. Programming the in-
dividual remote control for your remote con -
trol takes place near the center of the radiator
grille. There is a control module attached at
this location .
A one -time programm ing of the sensor must
be performed before you are able to use sys-
tems with Home link. If the system does not
activate after performing the one-time pro-
gramm ing, check whether the system uses a
rolling code
q page 127 for vehicles without
the MMI*.
& WARNING
-
- Never use the Homelink transmitter
with any garage door opener that does
have not the safety stop and reverse fea-
ture as required by federa l safety stand-
ards. This includes any garage door open-
er model manufactured before April 1,
1982.
- A garage door opener which cannot de-
tect an object, signaling the door to stop
and reverse does not meet current feder-
al safety standards. Using a garage door
opener without these features increases
risk of serious injury or death.
- For safety reasons never release the
parking brake or start the engine while
anyone is standing in front of the vehicle.
- A garage door or an estate gate may
sometimes be set in motion when the
Homelink remote control is being pro-
grammed. If the device is repeatedly ac-
tivated, this can overstrain motor and
damage its electrica l components - an
overheated mot or is a fire hazard!
- To avoid possib le injuries or property
damage, please always make abso lutely
certain that no persons or objects are lo-
cated in the range of motion of any
equipment being operated.
{D Tips
- If you would like more information on
Homel ink, where to purchase the Home-
Link compat ible prod ucts, or wou ld like
to purchase the Homelink Home Light-
ing Package, please call toll-free:
1-800-355-3515.
- For Declaration of Compliance to United
States FCC and Industry Canada regula-
tions
¢ page 2 78.
- For security reasons, we recommend that
you clear the programmed buttons be-
fore selling the vehicle.
Operation
Applies to veh icles : wit h Homeli nk
~
,.......,,...--, ...........
~
,;,,, r . o : o . ) .~
®
Fig. 136 Headl iner: controls
Requirement : The buttons must be program-
med
¢ page 125 or ¢ page 126 . II>
To Next Page
Loading...
